Experimental research on the mechanical properties of Camellia oleifera fruit shell breaking by cutting and compression
Keywords:
agricultural engineeringAbstract
To mitigate the damage rate of Camellia oleifera seeds during the process of Camellia oleifera fruit dehulling, a Camellia oleifera fruit cutting and compression machine was developed. This machine operates on the principle that the shell-breaking stress of Camellia oleifera fruit is reduced following cutting, thereby integrating the steps of grading, cutting, compressing, and separating for the dehulling of Camellia oleifera fruit. Utilizing the electronic universal testing machine, a 4-factor single-factor test was conducted, including the number of cutting knives, cutting direction, compressing direction, and Camellia oleifera fruit size. The results showed that the average breaking force of Camellia oleifera seeds was 196.33 N. Compared with direct separating without cutting, the shell-breaking of Camellia oleifera fruit with 1, 2, 3, and 4 cuts decreased 30.14%, 38.62%, 45.05%, and 47.74%, respectively. Compared with cutting along the long axis, the shell-breaking force of Camellia oleifera fruit cutting along the minor axis decreased 8.1%; however, the effect of cutting direction on shell-breaking force is not significant. The shell-breaking force of Camellia oleifera fruit compressing along the long axis was 24.11% lower than that of Camellia oleifera fruit compressed along the minor axis. With the increase of Camellia oleifera fruit size, the shell-breaking force of Camellia oleifera fruit also increased. The shell-breaking force of 25-30 mm, 30-35 mm, and 35-40 mm was 85.62%, 127.34%, and 178.69% higher than that of 20-25 mm, respectively. In conclusion, using grading measures, making one cut along the long axis and compressing along the long axis is a suitable method for husking of Camellia oleifera fruit.
Keywords: Camellia oleifera fruit, cutting; compressing, shell-breaking force, seed-breaking force
DOI: 10.25165/j.ijabe.20261903.10221
Citation: Zheng H N, Liang F, Zhou Y Y, Yuan L. Experimental research on the mechanical properties of Camellia oleifera fruit shell breaking by cutting and compression. Int J Agric & Biol Eng, 2026; 19(3): 307–313.
References
[1] Li Z, Tan X F, Liu Z M, Lin Q, Zhang L, Yuan J, et al. In vitro propagation of Camellia oleifera Abel. using hypocotyl, cotyledonary node, and radicle explants. Hutchence, 2016; 51（4）: 416–421.
[2] Deng Q E, Li J N, Gao C, Cheng J Y, Deng X Z, Jiang D Z, et al. New perspective for evaluating the main Camellia oleifera cultivars in China. Scientific Reports, 2020; 10（1）: 20676.
[3] Yang P, Fu H Y, Sun P G, Ren L Y, Zheng Z H, Xu J H, Lv L L, et al. Shell structure impacts Camellia oleifera fruit splitting during dehydration. Food and Bioproducts Processing, 2024; 148: 298–308.
[4] Luan F, Zeng J S, Yang Y, He X R, Wang B J, Gao Y B, et al. Recent advances in Camellia oleifera Abel: A review of nutritional constituents, biofunctional properties, and potential industrial applications. Journal of Funct Foods, 2020; 75: 104242.
[5] Gao S, Wang B F, Liu F D, Zhao J R, Yuan J, Xiao S X, et al. Variation in fruit morphology and seed oil fatty acid composition of Camellia oleifera collected from diverse regions in southern China. Horticulturae, 2022; 8（9）: 818.
[6] National Forestry and Grassland Administration of China. China Forestry and Grassland Statistical Yearbook 2022. In National Development of Oil-tea Camellia Industry （pp.32）. Beijing: China Forestry Publishing House. 2023. （in Chinese）
[7] National Forestry and Grassland Administration of China. In the next three years, China will add 20 million mu of Camellia oleifera. 2022. https://www.forestry.gov.cn/c/www/ycjcbs/33880.jhtml
[8] Zhu G F, Ren J J, Wang Z, Xiang H, Mu R S, Li S H. Design of shelling machine for Camellia oleifera fruit and operating parameter optimization. Transactions of the CSAE, 2016; 32（7）: 19–27. （in Chinese）
[9] Luo X L, Zhu W X. Processing technology of oil-tea Camellia seed oil and comprehensive utilization of Camellia oleifera resources. China Oils Fats, 2010; 35（9）: 13–17. （in Chinese）
[10] Kang D, Wang Y, Fan Y H , Chen Z J. Research and development of Camellia oleifera fruit sheller and sorting machine. IOP Conference Series: Earth and Environmental Science. IOP Publishing, 2018; 108（4）: 042051.
[11] Zhu G F, Liu H, Xie Y C, Liao Q, Lin Y W, Liu Y H, et al. Postharvest processing and storage methods for Camellia oleifera seeds. Food Reviews International, 2018; 36（4）: 319–339.
[12] Wu J Y, Wang Y, Xiong P Y, Ruan J Y, Liao Z Q. Research status and prospect of mechanized hulling device for Camellia oleifera fruit. Food and Machinery, 2023; 39（8）: 208–217. （in Chinese）
[13] Lan F, Cui Y, Su Z H, Li Z M, Xie S. Design and test on shelling and sorting machine of Camellia oleifera fruit. Transactions of the CSAE, 2012; 28（15）: 33–39. （in Chinese）
[14] Tang J Y, Wang D, Kou X, Qu Z X, Xu K S. Design and experiment of four-channel fully automatic shelling machine for ripe fresh Camellia oleifera fruit. Transactions of the CSAM, 2021; 52（4）: 109–116. （in Chinese）
[15] Meng J, Li A, Liang X. Structure design of Camellia oleifera fruit sheller by EBD method. IOP Conference Series: Earth and Environmental Science, 2020; 585（1）: 012163.
[16] Huang W, Wang D, Taylor A G. Seed pressing to remove cupules and obtain caryopses in eastern gamagrass. Seed Science and Technology, 2016; 44（1）: 114–124.
[17] Rasli A M M, Nawi N M, Ahmad D, Yahya A. The effect of crop parameters on mechanical properties of oil palm fruitlets. Scientia Horticulturae, 2019; 250: 352–358.
[18] Yang X Y, Qi Y X. Study on breaking mechanism of chestnut shell based on finite element analysis. Journal of Physics: Conference Series, 2021; 1865（3）: 032001.
[19] Wei X, Chen X Q, Liao P, Huang W C. Study on the mechanical properties and the way of breaking the shell of fresh Camellia oleifera fruit. Horticulturae, 2023; 9（2）: 236.
[20] Tang X, Xie F P, Li X, Liu D W, Wang X S, Ou J S. Experimental research of mechanics characteristics of Camellia Oleifera fruit cracking. Shanxi Agric, Univ. （Natural Science Edition）, 2015; 35（4）: 435–440. （in Chinese）
[21] Xue Q, Guo J C, Yang S, Li M Z. Experimental study on the static pressure characteristics of the fresh fruit of Camellia oleifera. Journal of Shenyang Agricultural University, 2020; 51（5）: 593–598.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 International Journal of Agricultural and Biological Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJABE is an international peer reviewed, open access journal, adopting Creative Commons Copyright Notices as follows.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
